Stainless Steel Weld Macro Etch Test Kit – TK04
Stainless Steel Weld
Macro Etch Test Kit - TK04
This is a professional test kit for safe, fast and easy macroscopic etching of cross-sections of stainless-steel welds for internal inspection. This allows you to easily determine the depth and quality of the weld. This kit is suitable for stainless steel but also works for low-alloy steel.
With this kit you can make about 40 macro-etches from stainless steel welds.
This kit contains etching fluids, a (safe) electrode with battery holder including battery, cotton swabs for applying the etching liquid, sanding paper, safety gloves, a manual and safety sheets.
Refill sets are additionally available (Article TK04RF).
Usage
The welded joint must be ground or sawn independently. The weld seam must then be sanded flat by hand with the sandpaper from this kit. If necessary, the mechanical sanding and polishing kit can also be used for this purpose (Article TK02). It can then be safely electro-etched with the etching liquid and tools from the kit. The quality of the weld seam can then be visually assessed.
The advantages of this kit are:
- Easy and quick: The liquid is easy and quick to apply with this kit, giving you quick results.
- Safe: Safety sheets and manual are included to work safely with the etching liquids.
- Long shelf life: the test fluids have a shelf life of years, so you can use this test kit whenever you want.
Ordering is only possible for companies.
You will receive our quotation by e-mail within one or two working days. After your acceptance of our quotation, we will send the test kit as fast as possible.
Disclaimer
Although this product has been compiled with the utmost care, MATinspired B.V. cannot be held liable for damage that results from the use of or contact with the product. This measurement method is only an indication, and MATinspired B.V. is not responsible for the test results.